厦门附近想过夜电话联系

Pneumatic three way sanitary ball valve

  • [valve model]: Q684F,Q685F
  • [diameter specification]: DN15~DN102
  • [structural form]: Tee L, tee T
  • [valve body material]: 304, 316L stainless steel
  • [nominal pressure]: PN10,PN16
  • [applicable temperature]: ≤180℃
  • [application scope]: Liquor, beverage, pharmaceutical, food processing, biochemical industry, etc
Consult manufacturer Online Message
  •  Pneumatic three way sanitary ball valve

Product features

It can be used for three-way and three-way split valve body made of stainless steel for sanitary service. The pneumatic three-way sanitary ball valve adopts quick installation connection, which is convenient for disassembly, maintenance and cleaning of valve chamber. The inside and outside of the valve body are polished and sterilized, and the smooth surface ensures cleanliness without potential pollution. It can be widely used in pharmaceutical, food processing, beverage and other fields to cut off or adjust medium flow.
 
Features of pneumatic three-way sanitary ball valve:
 
1. The sealing ring of pneumatic three-way sanitary ball valve is fully enclosed, tightly wrapping the valve core, without medium accumulation area and dead angle.
2. The quick installation mode of pneumatic three-way ball valve is convenient for connection and operation, and can be disassembled and installed quickly, bringing convenience for future cleaning work.
3. According to the structure, it can be divided into three-way L-type and T-type, realizing the use of pipeline medium reversing, shunting and merging.
4. During the maintenance and replacement of pneumatic three-way quick installation ball valve, only two pieces of clamp can be loosened to dismantle the valve, without damaging the surrounding wall, thus reducing the maintenance time and maintenance cost.
5. The pneumatic three-way quick installation ball valve can not only fast switch off the pipeline medium, but also adjust the flow, pressure, temperature and other parameters.
Principle of pneumatic three-way sanitary ball valve:
The pneumatic three-way sanitary ball valve can not only realize the switching of medium flow direction, but also make the three channels connected with each other. At the same time, any channel can be closed to connect the other two channels. The flexible control of the pipeline is the combination or diversion of medium (flow direction is shown in the figure below).
 Schematic diagram of three way ball valve
T-type three-way ball valve can connect or switch three orthogonal pipelines to each other, and play the role of shunt or confluence; L-type three-way ball valve can connect two mutually orthogonal pipelines to cut off the other channel and change the flow direction of medium.

technical parameter

Nominal diameter DN15~DN102(mm)
Nominal pressure PN1.0MPa
structural style Tee T, tee L
Seat Tightness Polytetrafluoroethylene (PTFE) ≤ 180 ℃
Link mode Quick coupling clamp
body material Stainless steel 304, 316, 316L
Ball core material Stainless steel 304, 316, 316L
Form of action Single acting (spring return) normally open normally closed Gas closing and opening
control mode Cut off (switch control) Regulating type (4-20mA signal to realize the regulation function)

Quotation process

Valve price:

Due to the different requirements of order quantity, packaging and delivery mode, as well as the fluctuation of valve raw material price, the valve price will be greatly different. Therefore, the price of our products is not indicated on the website. Please understand.

If you select a valve product on this website, if you need to know the price or ask for relevant technical information, please contact us. We will reply immediately, and according to your requirements, we can select the right valve products for you, so that your purchasing process is easy and pleasant.

Quotation process:

1. Please fax the name (or product model) of the valve you selected, the required order quantity, packing requirements, delivery time, your company name, location and contact information of your company to 021-36311208 Or telephone number: 021-60547555。

2. After receiving the customer's purchase list, our company will provide customers with valve quotation "price list", model selection "valve model" and technical guidance as soon as possible.

3. Special requirements, etc.

Ordering instructions

1、 If the customer has special requirements for the product, the following instructions shall be provided in the order contract:
(1) Valve body material (such as: plastic, cast steel, stainless steel...)
(2) For example, flange connection
(3) Nominal diameter, pipe size
(4) Ambient temperature and pressure range
(5) Supply voltage, air pressure
(6) Fluid properties (including nominal pressure, temperature, viscosity or acidity or alkalinity)
2、 The company configures all kinds of driving devices according to the special requirements of customers. Pneumatic control
3、 If the customer provides the determined valve type and model, the customer shall correctly explain the meaning and requirements of the valve model (for details, refer to the description of valve model preparation), and sign the contract under the condition that both parties understand and agree.
4、 After the customer tells the required valve model, specification, quantity and delivery time and place, 20% of the total amount of deposit or full payment shall be timely remitted to our company's account, and the rest shall be remitted before delivery, so as to arrange delivery in time.
5、 After confirming the purchase, our company carries on the production in strict accordance with the delivery date. According to the different types and quantities of orders, the product processing cycle is generally 3 to 30 days, and the specific delivery time is subject to the contract. Please make sure that the order is in time for you.
6、 According to the needs of customers, our company provides network distribution services, delivering goods to the branches (offices) in major cities, and providing door-to-door delivery service. After the product acceptance, our company will provide after-sales service.